The history of modern rubber mixing can be traced back to the 1800s when the use of different types of rubber mixing machines was a norm. Regions like the USA and Europe were in a phase where new rubber factories were being established, and it was considered as a revolutionary step that would later construct the entire modern rubber industry. The mixing mills and their usage can be traced back to the 1820s when different variations of the famous Hancock’s Pickle were being used until an official patent was registered in the year 1835. The use of Hancock’s Pickle was a groundbreaking advancement at that time, which gave birth to the European contributions to the global rubber industry. It can be said without any issues that the traces of development go back to the year 1835 when the endeavors for a functioning rubber industry had started.
The advancements in the rubber milling industry have been happening year after year, but the basic dynamics that are followed today are mainly based on the principles of the classic two roll rubber mill as even today, the mixing is done using the 2-wing tangential rotors. It’s been more than 100 years, but the initial designs that were used in the earliest builds of various mixers are still a global standard when it comes to the main designing elements. The global reliance of the rubber industry on these mixers has made them easily available in the market, and different suppliers and manufacturers even provide the spare parts for each mixer depending on the model and design of each machine. The mills used for mixing rubber might vary in terms of their specification, but the design remains pretty much the same.
Here’s a brief guide to the evolution of the rubber mixing mill.
The two-roll rubber mills are considered to be the first mills that were used in the manufacturing procedures for natural rubber. These rubber mills are considered the primary standard for the machinery used in the rubber-making process all over the world. The advanced approach that Edwin Chaffee initiated in the 1830s made way for advanced technology, and following the blueprints of the initial design given by Edwin, many inventors offered improvements in the overall design of the two-roll rubber mill. Today, most of the mills that are used in different industries are based on the early concepts that were introduced around the two-roll rubber mills. Large-scale industries such as the tire and shoe-making factories utilize this tool to get the appropriate results to date. The modern face of this internal mixing equipment uses automated means to get the desired outcomes and is less reliant on manpower in order to get them into a functioning state. There are several microprocessors in place that take control of the entire room, making sure that the final product is according to the specifications provided to the machine.
The Banbury mixer was invented by Fernley H. Banbury in the year 1916 in order to rectify the problems that were being faced within the rubber industry in the USA. The mixing mechanics of the rubber mixer depends on a tapering nip between the rotor and the sidewall of the mixer to provide mix dispersion. It also depends on the transfer of material around the mixing chamber and from one rotor to the other to give mix distribution. Mainly the mixing effect is accomplished between rotor wings and the chamber wall. The unique benefit that this machine provided was that the paths of the blade tips only just fail to touch.
The rotors in the machine were designed not to overlap one and the other. The unique character of this machine helped it to function at various speeds that were beneficial for getting aligned with different rubber manufacturing needs. There were several versions of these machines that followed the principles of Banbury’s first attempt, and later different adjustments and refinements were made in order to make the machine useful and effective in different rubber-making purposes. The impact that this machine had was enormous, and testimony of it is that even today, more than half of the world’s rubber is mixed on different 2-wing tangential rotors.
The traces of the intermix takes us back to the year 1930 when it first came into the business in the United Kingdom. The inventors of this concept might be unknown, but later on, the main patent of this iconic machine was contracted to Francis Shaw and Company of Manchester, who eventually acquired and patented the basic design. The intermix provided a different approach towards the mixing of the rubber, with the emphasis given to the transfer of material along the length and in the opposite direction to the rotor. The transfer that occurs between the occurs is because of the characteristic of the rotors to overlock during the entire process.
The rotor mechanism used in this process works at the same speed as the tangential system, but with this system, the mixing occurs in the nip between the rotors. The intermeshing mechanism is far superior to the tangential system when it comes to the controlling of temperature during a mixing process. The use of intermeshing rotors has increased considerably, especially in the technical rubber industry.
The VIC, also known as the Variable Internal Clearance The mixer is known to be one of the most recent takes on rubber mixing mechanisms. It was introduced in the year 1987 to address the several issues that have occurred over the years due to the extensive reliance of different industries on rubber mixing tools. A device allows axial movement of the rotors to increase or decrease the gap between them while mixing on the VIC mixing machine. The feed of large batches of rubber at the start of the cycle is quite easier with this machine that has allowed to minimize the recurring issues that were first found with the intermeshing rotors. When it comes to the variable internal clearance mixer, it allows the adjustment of the rotors to a suitable mixing position for each type of rubber compound.